New motorised retractable shade sail Zefira: save €500 now with code ZEFIRA500

Discover our fabrics! Order your swatches and feel the quality for yourself

 We custom-make your project in just 5 days!

insights

Useful information on shade sail anchoring accessories: which threaded rods to choose?

The set of 4 pcs. threaded rods M10 - 12cm (Article-No.: 2030026) is ideal for installing our wall plates.
The threaded rods are made of galvanised steel with a diameter of M10 and a length of 12cm.
They are suitable for fixing our wall anchor plates; they are NOT suitable for installing poles.

This set includes:

  • 4 threaded rods M10 with a length of 12cm
  • 4 washers
  • 4 screw nuts

They are compatible with the following Maanta wall kits:

The set of 4 pcs. threaded rods M12 - 13cm (Article-No.: 2030025) consists of 4 threaded galvanised steel rods of diameter M12 and length 13cm.
They are suitable for fixing the base of Maanta poles (AluSimple and Ulisse) to the ground and the collars of Maanta poles to the wall.

This set includes:

  • 4 threaded rods M12 with a length of 13cm
  • 4 washers
  • 4 screw nuts

POLE COMPARISON TABLE

EZ Mast EZ Mast Stainless Steel Ulisse Alu Simple
Materials available Galvanized steel
Paint coated Galvanized Steel		 Stainless steel 304 Galvanized steel
Paint coated Galvanized Steel		 Paint coated aluminum
Available inclinations 80° 80° 75°
90°
Wall mounting		 75°
90°
Wall mounting
Height 262 cm 262 cm 275 cm 290 cm
Shape/Diameter Round (70 mm profile) Round (70 mm profile) Elliptical (101 x 50.8 mm profile) Maanta Design (122 x 70 mm profile)
Anchor points 5 5 4 front + 2 rear Infinite, via front and rear track
Saltiness resistance (Galvanized Steel) (Stainless Steel 304)
Available colors Galvanized, Anthracite, Dark Corten Stainless Steel Galvanized, Anthracite, Dark Corten Silver, Anthracite, Dark Corten
Base plate Included 8 mm thick Included 8 mm thick Included 10 mm thick Included 10 mm thick
Accessories included EZ Muscle x3 pole
EZ Rear bracing system
EZ Hardware		 EZ Muscle x3 pole
EZ Rear bracing system
EZ Hardware		 Muscle x3 pole
Hardware		 Muscle x3 pole
Hardware
Recommended for sails up to 25 m² with rear bracing system (included)
up to 20 m² without rear bracing system		 up to 25 m² with rear bracing system (included)
up to 20 m² without rear bracing system		 up to 35 m² with rear bracing system (optional)
up to 20 m² without rear bracing system		 up to 45 m² with rear bracing system (optional)
up to 35 m² without rear bracing system
Recommended application Gardens, patios, premises, dehors Gardens, patios, premises, dehors Gardens, patios, premises, dehors All locations, locations with saltiness
Customized availability No No No Yes with minimum order
Warranty years*** 2 2 2 2
Tab EZ Mast Tab EZ Mast Stainless Steel Tab Ulisse Tab Alu Simple

*** warranty is recognized for products installed as per our guides and only on manufacturing defects

FAQ

The Maanta wall plates are specially designed to support the tension of a sun shade sail; they are larger than the standard plates sold on the market and have 4 holes.
You therefore need 4 threaded rods per wall plate (one set consists of 4 threaded rods M10 12cm long and allows for the installation of one plate)

Yes, they are not included in the shade sail poles and anchor kits.
This allows you to choose the appropriate threaded rod or dowel according to your needs.

Once the threaded rod has been inserted into the chemist, it is advisable to allow it to rest for at least 30 minutes. During this short time the chemist will harden. For optimal setting, 2 to 12 hours are a good time. 

We recommend using a 14 mm drill bit and drilling about 15 cm deep.
We recommend drilling the concrete plinth in a "funnel shape" so that the chemical will fill the hole completely.

For each Ulisse and Alu-simple pole with 75° base and 90° base you need 1 set of 4 threaded rods M12 x 13cm.
Please note: 2 sets of 4 threaded rods M12 x 13cm are required for the pole Ulisse with wall mountings: a total of 8 threaded rods.

For the pole Ulisse you need a total of 8 threaded rods M12 - 13cm (2 sets of 4 - threaded rods M12 - 13cm).
For the pole Alu-Simple you need a total of 4 threaded rods M12 13cm (1 Set 4 pcs - Threaded rods M12 - 13cm)

Yes, the silicone gun can be used for 150ml, 280ml and 300ml cartridges.

Yes, you can save money by choosing the kit that includes the gun and chemical anchor cartridges.